EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Solar Charge Controller is a hugely productive solar controller designed for off-grid photo voltaic systems. Based on multiphase synchronous rectification engineering, it makes certain optimized energy conversion and technique steadiness for an array of photovoltaic (PV) apps.
Key Attributes on the EPEVER Tracer AN Series Controller
The Tracer AN sequence makes use of EPEVER Solar Cost Controller technology for outstanding photo voltaic Electrical power harvesting. Key characteristics include:
Multiphase Synchronous Rectification (MSR) for improved Electricity conversion.
State-of-the-art MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery lifetime.
Liquid crystal display Screen with true-time info monitoring.
Numerous Load Control Modes which includes guide and timer.
In depth Digital Protections versus overcharging, around-discharging, shorter circuits, and reverse polarity.
Move-by-Action Tutorial to Putting together the EPEVER Tracer AN Series Controller
1. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer manual.
Verify the product selection and voltage scores match your photo voltaic panel and battery specs.
2. Mounting the Charge Controller
Find a perfectly-ventilated, dry site near to the battery bank.
Secure the Tracer AN controller utilizing the presented mounting brackets.
Keep suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Constantly stick to correct protection protocols and make sure the technique is driven off in advance of connecting parts.
Phase 1: Join the battery terminals on the charge controller (positive to favourable, negative to unfavorable).
Step 2: Connect the solar panel array for the PV input terminals.
Action three: Link the load terminals if utilizing a immediate load connection.
Phase four: Double-Test all connections for polarity and tightness.
four. Configuring the Controller Options
Ability within the controller by connecting the battery initially.
Use the Liquid crystal display display to navigate the settings menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild Management.
5. Monitoring and Facts Logging
The Tracer AN Sequence supports Read more true-time checking utilizing the MT50 distant meter.
Information is usually logged by using the RS485 interaction port working with program for instance Photo voltaic Station Computer.
Remote checking is feasible Together with the EPEVER WiFi module.
6. Troubleshooting Typical Issues
Issue one: No Electric power Output
Test battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Problem two: In excess of-Voltage Safety
Validate the photo voltaic array’s voltage rating.
Change technique parameters if essential.
Issue three: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings within the menu.
Great things about the Tracer AN Series with MSR Technology
The multiphase synchronous rectification know-how assures:
Higher Effectiveness: Decreased Vitality losses during conversion.
Improved Trustworthiness: Stable general performance below variable hundreds.
For a longer period Battery Daily life: Consistent and exact charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technologies is really an Outstanding option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up guide, consumers can be certain maximum efficiency and program longevity.